C1340 Crimp module

C1340 Crimp module

Process Modules

  • C1340 Crimp module

    C1340 Crimp module

  • C1370

    Top tool fixture with integrated CFA sensor

  • C1370

    Innovative operation on crimp module during the setup process

Maximum productivity due to shortest conversion times

State of the art efficiency and precision

  • Wire cross sections from 0.125 mm² to 6 mm² (AWG 26 – 10)
  • Maximum crimp force of 22 kN
  • Cycle time (optimized) about 220 m/s depending on setting
  • Unrivaled level of positioning accuracy and precision

The C1340 crimp module guarantees the shortest changeover times on the latest fully automatic wire processing machines from Komax. Cables are positioned directly on the module, thus greatly reducing the time spent on setup. The reliable CFA+ crimp force analysis ensures top quality and minimal rejects. This precision combined with time savings boosts productivity.

Uniquely effective user guidance

LED illumination guides the crimp module operators through the various work zones and points out focal points and hazards to them. This feature and the central operator unit on the crimp module cut changeover and setup time to a minimum. The central operator unit makes it possible to fetch a new wire directly. The four positioning keys then allow the wire to be arranged precisely in the process position.

Strong, flexible and reliable

Commercially available terminals can be processed thanks to the increased crimp force of 22 kN, the continuously adjustable speed and the connectible split cycle function. The robust crimp module design delivers extraordinary repeat accuracy. Tool fixtures are available for all conceivable applicators.

Reliable and high quality production

The CFA+ crimp force analysis reduces the reject rates to a minimum while preventing unnecessary wear and saving costs. Statistical data supports the evaluation of the production output. Exacting cable and terminal combinations can undergo a detailed analysis with CFAlab.

Wire cross-sections 0.125 – 6 mm² (AWG 26 – 10)
Maximum crimp force 22 kN
Stroke Programmable from 10 – 40 mm, in increments of 1 mm
Cycle time (optimized)
Approx. 220 ms depending on the settings
Wire line height
Standard foot: 270 mm, setting range 0 to 25 mm
Attachment of applicator
(crimp tool)
Quick-action clamping system available for a large number
of tools
Shut height
135.8 mm, (standard) setting range +5/-3 mm
Crimp force analysis
RAM adapter with integrated CFA sensor for multi-step
evaluation over three measurement zones
Number of reference crimps
only 1 learning crimp
Mains voltage
3 × 480 V nominal (3 × 440 – 530 V) 50/60 Hz
3 × 400 V nominal (3 × 360 – 440 V) 50/60 Hz
1 × 230 V nominal (1 × 180 – 250 V) 50/60 Hz
Low voltage
24 V DC max. 2 A
Compressed air connection
5 – 8 bar oil-free
(for the two options air feed set and terminal strip chopper)
Dimensions (W × H × D)
220 × 910 × 550 mm
96 kg