The C1340 crimp module for fully automatic wire processing machines ensures low reject rates through CFA+/CFA crimp force monitoring and high productivity thanks to short changeover times.
In addition to efficiency and precision, the C1360 crimp module for Alpha and Gamma wire processing machines offers convenient automatic crimp height adjustment.
The C1370 crimp module for fully automatic wire processing machines ensures low reject rates through the CFA+/CFA crimp force monitoring and high productivity thanks to short changeover times.
The C1380 crimp module for the fully automatic Alpha 560 wire processing machine enables the crimping process for particularly wide wire cross sections from 2.5 to 16 mm².
Process Modulesmci 712
The mci 712 crimp module for fully automatic wire processing machines processes precise wire cross sections of 0.08 - 6 mm² with a maximum crimp force of 20 kN.
Process Modulesmci 722
The mci 722 crimp module for fully automatic wire processing machines processes precise wire cross sections of 0.08 - 6 mm² with a maximum crimp force of 20 kN.
Process Modulesmci 765 C
The mci 765 C seal module with fully integrated seal monitoring system (SPM) equips wires fully automatically with seals in all standard variants, including mini seals.
Process Modulesmci 782
Twisting stranded ends, as the mci 782 twisting module directly positioned in the crimp module makes possible, is a prerequisite for fast tinning with millimeter precision.
Process Modulesmci 792
The efficient mci 792 sleeve module can be used on wire processing machines to load single and double wires with different sleeve types precisely and reliably.
The X1582 twisting unit twists strand ends precisely from a wire cross section of 0.03 mm² and twisting strands from 2mm in preparation for the subsequent tinning process.
The X1585 fluxing/tinning module applies tin to strand ends precisely, reliably and lead-free. A wide range of applications is covered thanks to various tin nozzles.
The AEH-LS ferrule module crimps loose ferrules on pre-stripped wires. The wire is easily inserted and a sensor monitors the presence of a ferrule.
Process ModulesMIL Crimp CM03
The CM03 MIL crimp module can be used on most fully automatic wire processing machines for processing loose and turned pin and socket terminals.
With the S1441 seal module, the insertion of industry-standard seals and mini seals has been significantly increased in terms of processing speed, stability and quality.
The Schunk process module enables wires to be compacted with ultrasound. As an alternative to ferrules, compacting is increasingly being used for control cabinet construction.
Process ModulesCM 1/5 GS
With the ferrule module CM 1/5 GS, up to five different ferrules on strap in different lengths can be processed with a Quadro crimp design.
Process ModulesCM 04 Duo
The sequenceable ferrule module CM04 Duo crimps up to two loose ferrules with large cross-sections of 4 and 6 mm² on pre-stripped wires with a Quadro crimp design.
Process ModulesCM F20
With the ferrule module CM F20, up to five different ferrules on strap can be processed sequentially with a trapezoidal crimp design.
The X1592 sleeve module is HMI-ready and offers high flexibility and process stability. It can process over 70 different sleeve types on one module.