Process Modules
C1380
The C1380 crimp module for the fully automatic Alpha 560 wire processing machine enables the crimping process for particularly wide wire cross sections from 2.5 to 16 mm².
Innovative operation on the crimp module
Wire positioning directly on the module reduces the time required for setup, changeover and sampling. The inching mode ensures precise crimp position setup.
Production of complex crimp terminals thanks to 50 kN crimp force
With a maximum crimping force of 50 kN, even complex terminals up to 55mm in length can be easily processed in a reproducible manner.
Upper crimp applicator fixture with integrated CFA sensor
The precise crimp applicator fixture with the integrated CFA sensor ensures high production quality. CFA+/CFA crimp force monitoring reduces waste to a minimum.
Quality Tools
Crimp Module Analyzer
The Crimp Module Analyzer quality measuring device is used to measure and check the stability of the crimp module in μm using a two-stage force simulator.Learn moreQuality Tools
CFAlab
The CFA-Lab PC software evaluates the CFA/CFA+ crimp force monitoring data from crimping machines and modules. Optimizing the settings minimizes rejects.Learn moreSoftware and Networking
Komax HMI
Thanks to sophisticated user guidance, the Komax HMI (Human Machine Interface) enables simple, coherent and error-free operation of complex wire processing machines.Learn moreSoftware and Networking
TopWin
TopWin is a Windows-based user interface for all PC-controlled Komax fully automatic crimping machines, which offers high data security and smart data linking.Learn more
| Specification name | Specification value |
|---|---|
| Wire cross section min. | 2.5 mm² |
| Wire cross section max. | 16 mm² |
| Crimp force max. | 50 kN |
| Stroke programmable in 1mm/0.04 inch steps min. | 30 mm |
| Stroke programmable in 1mm/0.04 inch steps max. | 40 mm |
| Crimp force monitoring | CFA / CFA+ |
