Wire Crimping
Wire CrimpingUniCrimp 208
The UniCrimp 208 crimps with 33 kN (3.3 tons) of force, connecting all rear-feed and side-feed banded terminals with cross sections from 0.05 – 6 mm² (AWG30 - AWG10) to a conductor.
Wire CrimpingDelta 220
The basic Delta 220 model is a programmable crimping machine with crimp force monitoring and manual crimp height adjustment – optionally with stripping unit and bad contact cutter.
Wire CrimpingStripCrimp 208
The stripping and crimping machine StripCrimp 208 strips to a length of 0.5 – 15 mm (0.02 – 0.59") and crimps wires from 0.05 – 6 mm² (30 – 10 AWG) with 33 kN (3.3 tons) of force.
Wire CrimpingDelta 240
The Delta 240 semi-automatic crimping machine with crimp force monitoring offers automatic crimp height adjustment and stripping unit – optionally with bad contact cutter.
Wire CrimpingDelta 260
The programmable Delta 260 can place a seal, strip the wire and crimp a terminal in one cycle. It offers crimp force monitoring, automatic crimp height adjustment and a bad contact cutter.
Wire CrimpingDelta 520
The Delta 520 is a highly flexible and precise stripping and crimping machine for multi-core applications. This compact benchtop device offers high-quality processing and high output in a small footprint.
Wire CrimpingAM 02 C
The AM 02 C is an electropneumatically powered, modular stripping/crimping machine for processing small cross sections of 0.14 – 0.34 mm².
Wire CrimpingAM 02 universal
The AM 02 universal stripper/crimper processes loose insulated Z+F ferrules with cross sections of 0.5 – 2.5 mm² using a quadro or trapezoidal crimping tool.
Wire CrimpingAM 02.1
The AM 02.1 modular stripper/crimper efficiently processes loose, uninsulated Z+F ferrules with cross sections of 0.25 – 4 mm² and crimp lengths of 5 – 12 mm.
Wire CrimpingAM 02.1 C
The AM 02.1 C is an electropneumatically powered, modular stripper/crimper for uninsulated wires with a cross section of 0.14 to 0.75 mm².
Wire CrimpingAM 03
The electropneumatically powered AM 03 modular stripper/crimper processes loose twisted pin and socket terminals for strands with a cross section of 0.08 – 2.5 mm².
Wire CrimpingAM 03 C
The AM 03 C stripper/crimper processes small, loose twisted pin and socket terminals with cross sections of 0.08 – 0.5 mm². The strip and crimp depth is set manually.
Wire CrimpingAM 03 universal
The AM 03 universal crimping machine processes loose twisted pin and socket terminals in the range of 0.14 – 2.5 mm² for crimping with a 4/8-indent crimp shape,
Wire CrimpingAM 04
The AM 04 modular stripper/crimper efficiently processes loose, insulated Z+F ferrules with cross sections of 4 – 10 mm² and crimp lengths of 8 – 18 mm.
Wire CrimpingAM 04 Duomatic
The AM 04 Duomatic stripper/crimper processes two loose insulated Z+F ferrules with cross sections of 4 – 10 mm² and crimp lengths of 8 – 18 mm simultaneously.
Wire CrimpingAM 04.1
The AM 04.1 modular stripper/crimper efficiently processes loose, uninsulated Z+F ferrules with cross sections of 4 – 10 mm² and crimp lengths of 8 – 18 mm.
Wire CrimpingAM 05
The electropneumatically powered AM 05 stripping and crimping machine processes loose twisted pin and socket terminals. Sensors and actuators ensure that the terminals are positioned exactly.
Wire CrimpingCR 03 M
The CR 03 M electropneumatically powered and flexible crimper is designed for processing loose twisted terminals in the range of 0.08 to 2.5 mm².
Wire CrimpingCrimper-LS
The electropneumatically powered Crimper-LS bench crimper is designed for processing loose insulated ferrules of 0.5 – 2.5 mm² and crimp lengths of 6 – 12 mm.
Wire CrimpingPCM
The entirely pneumatically powered PCM fully automatic wire processing machine was designed for processing loose twisted terminals from 0.08 – 4 mm² with a 4/8-indent crimp shape.
Wire CrimpingSC 05 universal
The SC 05 universal is an electropneumatic and high-performance crimper for insulated or uninsulated twin or single ferrules from 0.5 mm² to 6 mm².
Wire CrimpingUNIC-G
The UNIC-G is an electropneumatically powered stripping and crimping machine for ferrules from 0.5 to 2.5 mm² and with a crimp length of 8 and 10 mm.
Wire CrimpingUNIC-GV
The UNIC-GV is an electropneumatically powered stripping and crimping machine that processes up to five ferrules on rollers without conversion or changeover.
Wire CrimpingUNIC-L
The UNIC-L electropneumatically powered stripping and crimping machine processes ferrules from 0.5 – 2.5 mm², a crimp length of 8 mm, and plastic collars in special sizes.
Wire CrimpingUNIC-LS
The UNIC-LS stripping and crimping machine processes ferrules of 0.5 – 2.5 mm² and a crimp length of 6, 8, and 10 mm as well as special sizes and multi-standard wires.
Wire CrimpingUNIC-LZ
The UNIC-LZ electropneumatically powered stripping and crimping machine processes loose twin ferrules from 0.5 to 1.5 mm² and a crimp length of 8 mm.
Wire CrimpingWire Processing Center (WPC)
The WPC is an integrated solution for preparing individual wires with cross sections ranging from 0.5 mm² to 10 mm² based on orders from EPLAN or another CAE system.
Wire CrimpingZ+F EVOCRIMP
The Z+F EVOCRIMP is an electrically powered stripping and crimping machine for processing Z+F ferrules from 0.5 to 2.5 mm² (AWG 20 – 14).
Highlights
Product
Services
For Smooth And Error-Free Machine Performance
With our service packages, we take care of your machines and provide tailored solutions for your needs.
Our service contracts cover calibration, inspection, and maintenance — and can also include warranty extensions or training services. On-demand services include ramp-up support, relocation and installation, repairs, emergency assistance, and ad-hoc maintenance with original parts. We also offer consulting, feasibility studies, and acceptance testing. Need help with financing? We've got you covered.