Wire Processing
CT 34
The CT 34 crimps loose-piece applications with up to 20 kN (2.5 tons) of force for open and closed barrel crimps, wire end ferrules, and machined contacts up to 50 mm² (1/0 AWG).
Technical data
| Specification name | Specification value |
|---|---|
| Crimp action | Parallel |
| Activation | Foot pedal |
| Safety shield | Fixed around the crimping dies |
| RAM speed | Approximately 1 cm/s (0.39 inch/s) |
| Wire cross section, wire end ferrules max. | 50 mm² |
| RoHS | The CT 34 complies with the EU guideline 2002/95/EG (RoHS). |
Related products
Browse alternatives
Wire CrimpingCT 15
The crimper CT 15 processes cross sections up to 6 mm² (10 AWG), 10 mm² (8 AWG), or 50 mm² (1/0 AWG) depending on the barrel or ferrules, with a crimping force of 15 kN (1.7 tons).
Wire CrimpingCT 30 S
The pneumatic crimper CT 30 S is made for loose-piece crimping applications. Its scissor-action crimping head uses up to 14 kN (1.6 tons) of force for wires up to 10 mm² (8 AWG).
Wire CrimpingCT 30 ST
The pneumatic CT 30 ST is designed for loose-piece crimping applications with up to 14 kN (1.6 tons) of force. The crimping dies remain parallel throughout the crimping process.