Wire Crimping
Wire CrimpingDelta 220
The basic Delta 220 model is a programmable crimping machine with crimp force monitoring and manual crimp height adjustment – optionally with stripping unit and bad contact cutter.
Wire CrimpingDelta 240
The Delta 240 semi-automatic crimping machine with crimp force monitoring offers automatic crimp height adjustment and stripping unit – optionally with bad contact cutter.
Wire CrimpingDelta 260
The programmable Delta 260 can place a seal, strip the wire and crimp a terminal in one cycle. It offers crimp force monitoring, automatic crimp height adjustment and a bad contact cutter.
Wire CrimpingDelta 540
The Delta 540 is a semi-automatic benchtop crimping machine equipped with all the necessary functions to process IDC connectors – available with optional connector-specific kits.
Wire CrimpingStripCrimp 208
The stripping and crimping machine StripCrimp 208 strips to a length of 0.5 – 15 mm (0.02 – 0.59") and crimps wires from 0.05 – 6 mm² (30 – 10 AWG) with 33 kN (3.3 tons) of force.
Wire CrimpingUniCrimp 208
The UniCrimp 208 crimps with 33 kN (3.3 tons) of force, connecting all rear-feed and side-feed banded terminals with cross sections from 0.05 – 10 mm² (30 - 8 AWG) to a conductor.
Wire CrimpingUni-M Applicators
The Uni-M can be used in automatic and semi-automatic benchtop crimping machines, processing banded terminals of open- or closed-barrel construction with metal or plastic carriers.