Wire Processing
CT 30 S
The pneumatic crimper CT 30 S is made for loose-piece crimping applications. Its scissor-action crimping head uses up to 14 kN (1.6 tons) of force for wires up to 10 mm² (8 AWG).
Technical data
| Specification name | Specification value |
|---|---|
| Wire cross section, wire end ferrules max. | AWG1/0 mm² |
| Crimp action | Partial scissor |
| Activation | Foot pedal |
| Safety shield | Fixed around the crimping dies |
| RAM speed | Approximately 1cm/s (0.39 in/s) |
| RoHS | The CT 30 S complies with the EU guideline 2002/95/EG (RoHS). |