Wire Crimping
Wire CrimpingDelta 220
The basic Delta 220 model is a programmable crimping machine with crimp force monitoring and manual crimp height adjustment – optionally with stripping unit and bad contact cutter.
Wire CrimpingDelta 240
The Delta 240 semi-automatic crimping machine with crimp force monitoring offers automatic crimp height adjustment and stripping unit – optionally with bad contact cutter.
Wire CrimpingDelta 260
The programmable Delta 260 can place a seal, strip the wire and crimp a terminal in one cycle. It offers crimp force monitoring, automatic crimp height adjustment and a bad contact cutter.
Wire CrimpingDelta 540
The Delta 540 is a semi-automatic benchtop crimping machine equipped with all the necessary functions to process IDC connectors – available with optional connector-specific kits.
Wire CrimpingCT 15
The crimper CT 15 processes cross sections up to 6 mm² (10 AWG), 10 mm² (8 AWG), or 50 mm² (1/0 AWG) depending on the barrel or ferrules, with a crimping force of 15 kN (1.7 tons).
Wire CrimpingCT 30 S
The pneumatic crimper CT 30 S is made for loose-piece crimping applications. Its scissor-action crimping head uses up to 14 kN (1.6 tons) of force for wires up to 10 mm² (8 AWG).
Wire CrimpingCT 30 ST
The pneumatic CT 30 ST is designed for loose-piece crimping applications with up to 14 kN (1.6 tons) of force. The crimping dies remain parallel throughout the crimping process.
Wire CrimpingCT 34
The CT 34 crimps loose-piece applications with up to 20 kN (2.5 tons) of force for open and closed barrel crimps, wire end ferrules, and machined contacts up to 50 mm² (1/0 AWG).
Wire CrimpingCT 36
The CT 36 uses parallel crimping action with up to 20 kN (2.5 tons) force and multiple safety features for open and closed barrels, and wire end ferrules up to 10 mm² (8 AWG).
Wire CrimpingCT 60
The CT 60 with forces up to 60 kN (6.7 tons) crimps open barrels up to 6 mm² (10 AWG), closed barrels up to 120 mm² (4/0 AWG), and wire end ferrules up to 240 mm² (475 MCM).
Wire CrimpingCT 34 S
The CT 34 S crimps loose-piece applications with up to 20 kN (2.5 tons) of force for open and closed barrel applications, including wire end ferrules up to 10 mm² (8 AWG).
Wire CrimpingCT 65
The CT 65 with forces up to 150 kN (16.9 tons), crimps open barrels up to 120 mm² (4/0 AWG) and insulated, non-insulated, and 4-indent closed barrels up to 300 mm² (600 MCM).
Wire CrimpingCT 150
The hydraulic crimper CT 150 uses up to 150 kN (16.9 tons) of force for open barrel crimps up to 150 mm² (300 MCM), as well as closed barrel up to 400 mm² (800 MCM).
Wire CrimpingStripCrimp 208
The stripping and crimping machine StripCrimp 208 strips to a length of 0.5 – 15 mm (0.02 – 0.59") and crimps wires from 0.05 – 6 mm² (30 – 10 AWG) with 33 kN (3.3 tons) of force.
Wire CrimpingUniCrimp 208
The UniCrimp 208 crimps with 33 kN (3.3 tons) of force, connecting all rear-feed and side-feed banded terminals with cross sections from 0.05 – 10 mm² (30 - 8 AWG) to a conductor.
Wire CrimpingUni-M Applicators
The Uni-M can be used in automatic and semi-automatic benchtop crimping machines, processing banded terminals of open- or closed-barrel construction with metal or plastic carriers.