Pull-Force Testing
Pull-Force TestingQ1210
The Q1210 precision measuring module for wire processing machines measures pull-out forces of 20 to 1000 N with a pull-out speed of up to 200mm / min.
Pull-Force TestingMicroPull 10
The MicroPull 10 is a standalone measurement system that measures pull-out forces ranging from 20 to 1000 N. It offers a variety of different pull-off speeds of up to 100 mm/min.
Pull-Force TestingQstat-100
The Qstat-100 motorized pull-out force measurement device checks and visualizes the pull-out profile as a transportable table-top device to check the wire harness quality.
Pull-Force TestingQ2205
As a module in a wire processing machine, the Q2205 measurement device measures with a defined pull-out speed of 25 or 50mm/min the pull-out forces of 20 to 500 N.
Pull-Force TestingQstat Pro
The Qstat Pro is a motorized bench top Pull Tester. It also serves as a quality inspection station for wire harness production on the shop-floor level.
Pull-Force TestingPullTester 25
The benchtop PullTester 25 measures pull forces on crimp and ultrasonic metal welding connections, with two scales ranging up to 500 N for small and up to 1,000 N for larger wires.
Pull-Force TestingPullTester 28
The benchtop PullTester 27 measures pull forces of 2,000 and 5,000 N as standard, or optionally 5,000 and 10,000 N, for wire crimp and ultrasonic metal welding connections.
Pull-Force TestingPullTester 20
The single-range PullTester 20 is an economical, motorized benchtop device for measuring the stability of the crimp connections with pull forces of up to 500 N.
Pull-Force TestingPullTester 325
The triple-range PullTester 325 analyzes pull-off forces of up to 200 N (45 lbf), 1,000 N (225 lbf), and 2,000 N (450 lbf) for crimp/welded connections with different pull rates.
Pull-Force TestingPullTester 26T
The measuring range of the PullTester 26T is divided into two separately calibratable levels, measuring pull-off forces up to 200 and 1000 N with a uniform, constant pulling speed.
Pull-Force TestingPullTester 320
The motorized PullTester 320 is used with automatic crimping machines to measure pull-off forces of 100 N (22.5 lbf), 200 N (45 lbf), and 1,000 N (220 lbf) for wire terminations.
Pull-Force TestingPullTester 326
The PullTester 326 uses pull forces of up to 200 N (45 lbf), 1,000 N (225 lbf), and 2,000 N (450 lbf) for destructive and nondestructive tests of crimp or welded connections.
Pull-Force TestingPullTester 27
The benchtop PullTester 27 measures pull forces up to 2,000 and 5,000 N as standard or optionally 5,000 and 10,000 N of wire crimp and ultrasonic metal welding connections.