Crimp to Crimp
Gamma 450
Gamma 450 - the compact, fully automatic wire processing machine - processes crimps and seals on both sides with a wire cross section of 0.13 –4 mm².
Optional: stationary tool and terminal reel quick changer
With the additional integrated STC manual changeover system, two crimp tools and terminal reels can be changed in the shortest possible time.
With the dual head double blade holder and ACD incision monitoring
With the dual head, the wires are cut precisely. The incision monitoring system checks the slightest contact of the blade with the conductor and sorts out the wires.
Optical quality control available with Q1250
To meet the most exacting quality requirements, the Q1250 strip quality monitoring system uses an optical sensor during operation to check every individual strand for defects.
Simple operation and setup directly on the module
Like all fully-automatic machines, the Gamma 450 is easy to operate. The parameters and operation can be set up directly on the crimp module.
Process Modules
C1340
The C1340 crimp module for fully automatic wire processing machines ensures low reject rates through CFA+/CFA crimp force monitoring and high productivity thanks to short changeover times.Learn moreProcess Modules
C1360
In addition to efficiency and precision, the C1360 crimp module for Alpha and Gamma wire processing machines offers convenient automatic crimp height adjustment.Learn moreProcess Modules
C1370
The C1370 crimp module for fully automatic wire processing machines ensures low reject rates through the CFA+/CFA crimp force monitoring and high productivity thanks to short changeover times.Learn moreProcess Modules
S1441
With the S1441 seal module, the insertion of industry-standard seals and mini seals has been significantly increased in terms of processing speed, stability and quality.Learn moreProcess Modules
X1582
The X1582 twisting unit twists strand ends precisely from a wire cross section of 0.03 mm² and twisting strands from 2mm in preparation for the subsequent tinning process.Learn moreProcess Modules
X1585
The X1585 fluxing/tinning module applies tin to strand ends precisely, reliably and lead-free. A wide range of applications is covered thanks to various tin nozzles.Learn moreQuality Tools
Komax 341
The Komax 341 crimp height measurement device measures terminals up to a height of 8 mm and compares them with the target crimp height. If there is no match, production will not start.Learn moreQuality Tools
Komax 345
The high-quality, digital Komax 345 microscope enables the control of stripping and crimping quality, even with miniature terminals and the smallest wire cross sections.Learn moreQuality Tools
Q1210
The Q1210 precision measuring module for wire processing machines measures pull-out forces of 20 to 1000 N with a pull-out speed of up to 200mm / min.Learn moreQuality Tools
Q1250 scalable
As a basic version, the scalable Q1250 module offers testing of the stripping as well as the crimp and seal. All quality features are comprehensively tested in the full package.Learn moreQuality Tools
Q2205
As a module in a wire processing machine, the Q2205 measurement device measures with a defined pull-out speed of 25 or 50mm/min the pull-out forces of 20 to 500 N.Learn moreMarking Systems
M1630 Jet
The M1630 Jet inkjet printer enables fast, flexible line printing with short changeover times. Operation takes place directly via the machine control.Learn moreWire Handling
F1110
The F1110 wire feed system for fully automatic wire processing machines (Alpha and Gamma) unwinds loose wire rings and wire drums evenly and easily.Learn more
| Specification name | Specification value |
|---|---|
| Wire cross section min. | 0.13 mm² |
| Wire cross section max. | 4 mm² |
| Wire length, single-sided processing min. | 60 mm |
| Wire length, processing on both sides min. | 60 mm |
| Wire length, processing on both sides (optional from) min. | 60 mm |
| Wire length max. | 65000 mm |
