40 years cutting edge


Modules de processus

  • MX-5050


MX-5050 – Center Stripping Machine

  • Robust with very long service life
  • Precise cut thanks to dedicated cutting knives
  • Ease of use with simple integration into software

The MX-5050 is the solution for center wire stripping. The robust and solid design makes it the ideal pre-station for center stripping.


The MX-5050 Center Stripping machine will remove a preset length of insulation from along the length of an insulated wire. Dedicated cutting knives and slitting jaws ensure a clean and precise cut. The machine is designed to process wire gauges from 0.5 mm² to 8 mm² (20 to 8 AWG). The MX-5050 machine is designed to remove a “window” of insulation from 8 mm to 25 mm long (0.315 in. to 1.0 in.).

Prerequisites for top quality center stripping

Good quality center stripping depends mainly on factors such as wire size, insulation thickness and stripping length. Dimensional accuracy is particularly important with thin-walled wires. If the wire is not dimensionally true, the insulation may not be fully removed or the strands may become damaged.

Insulation thickness and hardness are also crucial factors in the quality of insulation removal in center stripping. Stripping is easier and neater with thicker, harder types of insulation, as it does not yield while being cut.

Conductor diameter 0.8 – 4.3mm (0.031 – 0.170 in.)
Insulation diameter 1.2 – 6.6mm (0.047 – 0.260 in.)
Center stripping width range Min. 8.0 mm (0.315 in.)
Max. 25 mm (1.0 in.)
Machine cycle time Max. 1.03 seconds
Process speed Max. 3500/hour 
Air 2.3CFM @ 80 p.s.I. @3500/hour
Electrical 100 – 240 VAC, 50 – 60 Hz
(auto switching)
Floor space (w × d × h) 1070 × 865 × 1360 mm
42 × 34 × 53.5 in.
Weight 73 kg (160 lbs.)

Important: Up to 10 m of sample wire is needed in order to determine whether a wire can be processed. The tolerance figures for processing must also be indicated. Approx. 50 m of test wire is required with the order.