Kappa 315
Local Websites
40 years cutting edge

Kappa 315

Cut and Strip

  • Kappa 315

    Kappa 315

  • Kappa 315

    Kappa 315

  • Kappa 315

    Kappa 315

Kappa 315 – powerful up to 10 mm²

The Kappa 315 is fitted with a powerful and robust blade head and has a processing range that comprises cross-sections of 0.05 mm² to 10 mm²:

  • precise and robust blade axis
  • different blade shapes for the highest stripping quality
  • wire feed parts can be changed without tools
  • minimal setup time thanks to a unique conductor detector
  • memory for process parameters, includ-ing programmable wire applied pressure valves
  • processing set for short wire lengths starting from 30 mm

High-performance, even for small cross-sections.

Cutting force, high volume output and advanced sensor technology make the Kappa machines the number one choice for automated cutting and stripping, even for smaller wire cross-sections. The machines can be used very efficiently thanks to their simple, intuitive control elements.

Wide range of applications

The Kappa product family stands out thanks to its extremely broad processing range. Its intuitive and simple operation and controls allow you to easily set up even difficult-to-process materials, with extremely fast tool-free changeover to new types of wires.

Fast, simple operation

The intuitive TopTouch operating software guides the user through the process logically. During production, operators have maximum transparency thanks to simple adjustment settings for important parameters. This makes the Kappa machines especially intuitive and safe to operate.

Automatic diameter detection

The sensor-enabled wire diameter and cross-section detection makes it possible to set up and parameterize new wire materials at the push of a button. The unique, tool-free measuring principle reduces time-consuming setup to a minimum, while cut losses are also minimized thanks to the optical wire monitoring. The laser sensor continuously checks and immediately detects wire ends and stripping errors during production.

Versatile integration and interfaces

Peripheral devices such as wire feeding systems, markers or deposition units can be integrated easily as standard. Up to four peripheral devices can be controlled depending on the model. The machines also have a USB port for:

  • data backup
  • software upgrades
  • product and wire import as CSV files product and wire import as CSV files

TopWin Kappa – enhanced capabilities

The TopWin Kappa operating software expands the capabilities and functionality of Kappa machines via a PC user interface. Inkjet printing in multiple positions, mirror printing and double-sided labels can be controlled, including everything from pre-printed wires to logo markings and more.

Intelligent economical production

Products with the same wire are produced without cuts and therefore more economically with the help of job lists. Sequence production and part list processing are also possible. Products may be loaded directly into the job list, even while production is running. Changeover times are minimized thanks to automatic sorting of the different products.

Different types of production as required

Depending on the production process, part lists or sequences can be produced as multi-lead sets or as cable harnesses. In addition, TopWin makes it possible to verify materials, detect material changes or print commercial documents.

Perfectly networked

TopWin Kappa can be easily integrated into networks via the WPCS interface, including, for example, existing user networks. The production-control room software also enables centralized data management, production control and production monitoring.

Wire cross-section, stranded wires* 0.05 – 10 mm²
AWG 30 –8
Max. outer diameter 10 mm (0.4 in.)
Length accuracy Repeat accuracy
± (0.2 % + 1 mm (0.04 in.)
Flat cable processing Optional 12 mm (0.47 in.)
Wire length range 1 – 800’000 mm (0.039 in. – 874.9 yd.)
Short wire lengths Optional 30 mm
Max. wire transport speed 2.0 m/s (78.75 in./s)
Max. stripping lengths Full strip
Side 1: 100 mm (3.94 in.)
Side 2:  40 mm (1.57 in.)
Semi strip
Side 1: 999.9 mm (39.37 in.)
Side 2: 999.9 mm (39.37 in.)
Multi-step strip
Side 1: 999.9 mm (39.37 in.)
Side 2: 999.9 mm (39.37 in.)
Intermediate stripping
Number and length 		Optional
Automatic conductor detector
(automatic detection of cut depth,
cable end monitoring) 		Optional
Cable detector
(queue, end and slip monitoring, zero-cut optimization, outside diameter measurement) 		–
Length measurement system –
Straightening unit Optional
IOCS interface (expandable) 2 (4)
USB/ethernet Standard
Noise level < 70 dBA
Drive system
(with motorized closing axis) 		Single roller
Production table Optional
Electrical connection 110/230 VAC ±10%
50/60 Hz
300 VA
Pneumatic connection Optional for blade cleaning
Dimensions (W × H × D) 465 × 385 × 460 mm
(18.3 × 15.2 × 18.1 in.)
Weight 25.9 kg (57 lbs)
* Kappa machines can process many conductors outside the indicated cross-section range, however certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross-section range. If in doubt, we are happy to provide you with samples of your wires.
Cutting Cutting
Cutting pulled strands Cut pulled strands
Precision cut Precision cut
Full stripping Full strip both sides
Half stripping Half strip both sides
Multi-step stripping Multiple strip
Flat cable processing
Multi-conductor cable processing Multi conductor cable kappa
Core processing Inner conductor 2pol
Double sheath cable processing Double sheath cable
Intermediate strip Intermediate strip
Hot stamp marking Hot stamp marking with strip
Inkjet marking Inkjet offline with strip
Sequence processing Sequence cs

© 2020 Komax