Artos CS-370
Local Websites

Artos CS-370

Cut and Strip

  • Artos CS-370

    Artos CS-370

  • Complex stripping and cutting options

    Complex stripping and cutting options

  • Heavy Duty Wire Straightener

    Heavy Duty Wire Straightener

  • Wire slitting available option

    Wire slitting available option

  • Servo Feed Drive

    Servo Feed Drive

  • Easy Guide Changes

    Easy Guide Changes

  • Networking via WPCS protocol

    Networking via WPCS protocol

  • Rotary cutting available option

    Rotary Incision Unit is a retrofittable option (available from Nov. 2021).

Powerful, accurate, fast 

Cutting and stripping of heavy cables

  • Easy processing of cables with outer diameter up to 35 mm  and cross section up to 300 mm² 
  • Robust machine with multiple capability options
  • Minimize wire change down-time with fast easy guide changes 
  • Rotary Stripping unit for multiple stripping of multi-layer and shielded cables*

Protective cable processing and short-wire capabilities 

  • Even short wires (minimum 50 mm in length) can be processed without any reduction in quality
  • Innovative and versatile wire collection ensures smooth workflow
  • Servo driven belt system

Attractive options for every demand

  • Wire slitting unit and ink jet marking
  • WPCS interface for integration into MES
  • Rotary inscision unit for multiple stripping of multi-layer and shielded cables (available from Nov. 2021). The Rotary Incision Unit is retrofitable.

The powerful Artos CS-370 processes heavy cables with large diameters precisely and quickly. With it, the cutting and stripping of cables with a diameter of up to 35 mm at a length of only 50 mm is possible without any problems. Special applications offer a wide range of processing options for multilayer and shielded cables. With options for cable slitting and inkjet marking, the CS-370 is as versatile as it is reliable for all large cable applications.

Heavy cable wire cutting and stripping

The CS-370 is constructed for heavy duty. All components are very robust and guarantee a long service life of the machine with consistently high quality and precise processing. Even short cables with a short length of 50 mm can be cut and stripped. Steel cable processing is possible, but a feasibility check is required.

Order processing to the highest level

The Artos CS-370 masters all kinds of cutting and stripping techniques, such as window or mid stripping, two stage stripping. Even job sequencing for harness production is no problem. 

Wire sizes Up to 300 mm2 (600 MCM)* 
Outer wire diameter Up to 35 mm (1.4”) *
Minimum wire length  Standard mode: 152 mm (6’’) ; short mode < 50 mm*
Strip lengths Strip lengths pull values 1,0 – 1000 mm
Full strip removal length
left side 168 mm, right side 518 mm
Electrical requirement 220 VAC, 1 phase, 50/60 Hz
Air requirement 5 CFM (Cubic feet/min.) 5 – 6 bar (80 psi)
Dimensions Length 1790 mm (70,5 inches), machine body 2940 mm (115,75 inches) with operator station and single straightener width 605 mm (24 inches), height 1453 mm (57 inches)
Weight 820 kg (1808 lbs.) – machine weight
1090 kg (2400 lbs.) – packed weight
* wire dependent, may require purchase of one or more options shown.

© 2020 Komax