Belted Roller Drive with Programmable Contact Pressure
For precise handling of wires, the Cut & Strip Family E300 comes with a belted roller drive. The programmable feeding unit allows for very fine and targeted adjustments.
Wire Processing
Cut & Strip Family E300
The Cut & Strip Family E300 cuts and strips wire, tubing, ribbon, and multiconductor cable from 0.3 – 8.0 mm (0.012 – 0.31") with cross-sections from 0.05 – 10 mm² (36 – 8 AWG).
Highlights
Two-in-One Quick-Change Feeding Unit with Short Piece Kit
The E300 is equipped with a two-in-one quick-change feeding unit suitable for roller drives, which includes a short piece kit for processing short cables.
10-inch Color Touchscreen with Intuitive interface
On the 10-inch color touchscreen, the functions for job creation and article programs are neatly arranged. The focus on essential parameters facilitate operation.
Technical data
| Specification name | Specification value |
|---|---|
| Wire cross section | 0.05 - 10 mm² |
| Wire length/short mode | 18 mm (0.70") - 1,000,000mm (39,370"), 18 mm (0.70") measured on remaining insulation length |
| Wire outer diameter range | 0.012 - 0.31 in |
| Interfaces | USB-A, USB-C, SMI (D-Sub 15-pin), Ethernet, ESC (Emergency Stop Circuit) |
| Wire length/standard mode | 48mm (1.89") - 1,000,000mm (39,370") |
| Conductor cross section solid wire | 0.05 - 1.5 mm² |
Processing capabilities
Cutting to length
Full stripping
Partial stripping
Center stripping
Flat cable cutting to lenght
Multicore cable processing
Downloads
- Cut & Strip Family E300
PDF | English | 0.8 MB
- Cut & Strip Family E300
PDF | German | 1.2 MB
- Cut & Strip Family E300
PDF | Chinese | 1.4 MB
- Cut & Strip Family E300
PDF | Spanish | 1.2 MB
- Cut & Strip Family E300
PDF | Japanese | 1.6 MB
Related products
Browse alternatives
CoilingCableCoiler 500
The light-weight, economical single pan coiling machine CableCoiler 500 coils wire or cable of up to 12 mm (0.47") in diameter – operating with automatic cut and strip machines.
CoilingCableCoiler 1300
The CableCoiler 1300 is a fully synchronized cable coiler for cut and strip machines with two coiling units for round cables with up to 12 mm (0.47") diameter.
CoilingCableCoiler 1450
The single pan coiling system CableCoiler 1450 coils wire, cable or tubing of up to 16 mm (0.63") in diameter. Moveable pins allow adjustements to different coiling diameters.
CoilingKRI 850
The Ramatech KRI 850 is a fully synchronized, high-performance cable coiler for cables and flexible wires up to 35 mm (1.38") for Schleuniger cut and strip machines.
PrefeedingPreFeeder 1000
The PreFeeder 1000 handles reels weighing up to 20 kg (44.4 lbs.) and cables with up to 6 mm (0.236") in diameter for tension-free prefeeding to automatic wire processing machine.
PrefeedingPreFeeder 1100
The PreFeeder 1100 is a solid, reliable benchtop, puller prefeeding machine for cable reels up to 20 kg (44.4 lbs.) and cables of up to 15 mm (0.60") in diameter.
PrefeedingPreFeeder 2200
The PreFeeder 2200 is a puller prefeeding machine that pulls wire and cable with up to 15 mm (0.60”) in diameter from reels weighing up to 70 kg (154 lbs.).
PrefeedingPreFeeder 2500
The The PreFeeder 2500 is an active dereeler and the ideal feeding system for wire, small cables and tubing of up to 12 mm (0.47") in diameter with a rotating speed of 265 rpm.
PrefeedingPreFeeder 3200
The belt-driven Prefeeder 3200, with a standard storage unit of 1800 mm, pulls cables from the spools with a pulling force of up to 330N processing cables of up to 35 mm (1.38").
PrefeedingPreFeeder 4350
The PreFeeder 4350 handles reels weighing up to 400 kg (880 lbs) with wire up to 35 mm (1.3") in diameter. Its shaftless design allows for easy loading and unloading of the reels.
PrefeedingPreFeeder 4850
On the cable feeding system PreFeeder 4850 for reels weighing up to 600 kg (1,320 lbs.) and wire of 35 mm (1.3") diameter, all axes are actively driven for fast changeover.
StackingWireStacker 3150
The synchronized WireStacker 3150 is designed for precise axial stacking of cables – available in lengths of 2.5 m (8.2 ft), 5 m (16.4 ft), 7.5 m (24.6 ft), and 10 m (32.8 ft).