CT 36
The CT 36 uses parallel crimping action with up to 20 kN (2.5 tons) force and multiple safety features for open and closed barrels, and wire end ferrules up to 10 mm² (8 AWG).
Technical data
| Specification name | Specification value |
|---|---|
| Crimp action | Parallel |
| Activation | Foot pedal |
| Safety shield | Not required due to the additional safety feature that prevents the machine from cycling if the dies are opened more than 5.9 mm (0.23 in). |
| RAM speed | Approximately 1cm/s (0.39 in/s) |
| Wire cross section, wire end ferrules max. | 10 mm² |
| RoHS | The CT 36 complies with the EU guideline 2002/95/EG (RoHS). |
Downloads
Related products
Browse alternatives
Wire CrimpingCT 15
The crimper CT 15 processes cross sections up to 6 mm² (10 AWG), 10 mm² (8 AWG), or 50 mm² (1/0 AWG) depending on the barrel or ferrules, with a crimping force of 15 kN (1.7 tons).
Wire CrimpingCT 30 S
The pneumatic crimper CT 30 S is made for loose-piece crimping applications. Its scissor-action crimping head uses up to 14 kN (1.6 tons) of force for wires up to 10 mm² (8 AWG).
Wire CrimpingCT 30 ST
The pneumatic CT 30 ST is designed for loose-piece crimping applications with up to 14 kN (1.6 tons) of force. The crimping dies remain parallel throughout the crimping process.
Wire CrimpingCT 34
The CT 34 crimps loose-piece applications with up to 20 kN (2.5 tons) of force for open and closed barrel crimps, wire end ferrules, and machined contacts up to 50 mm² (1/0 AWG).