UV Laser Marking System
The UV Laser Marking System from Tri-Star Technologies marks UV laser markable wires, including Kapton, Tefzel, and Teflon insulated wires and cables, in cut-and-strip machines.
Technical data
| Specification name | Specification value |
|---|---|
| Wire outer diameter min. | 0.075 mm |
| Wire outer diameter max. | 10 mm |
| Conductor cross section max. | 13 mm² |
| Conductor cross section min. | 0.13 mm² |
| Marking speed | Up to 0.5 m/s (100 ft/min), depending on font size |
| Power requirement | 120V, 6 amps |
Downloads
Related products
Browse alternatives
Wire Marking & IdentificationInkjet Printer
The inkjet printer alphaJET 5 and X series from Koenig & Bauer is compatible with Schleuniger cut & strip machines, producing high-contrast markings even on small wires and cables.
Wire Marking & IdentificationHotStamp 4140
The marking system HotStamp 4140 is designed for precise marking of wires, cables, tubing, and a variety of thermoplastic materials with diameters from 1 – 12 mm (0.04" – 0.5").
Wire Marking & IdentificationHotStamp 4500
The HotStamp 4500 marks wires and cables with a wide range of insulation, such as PVC, Teflon®, Tefzel®, cross-linked, SXL, and GXL, with an outer diameter of up to 15 mm (0.59").
Wire Marking & IdentificationWraptor A6500
The Wraptor A6500 in-line wire and cable labeling system from Brady is compatible with Schleuniger cut-and-strip machines, integrating marking into a fully automated process.