komax Holding
 

Professionals in Advanced Automation

Komax 62 – Notching and slitting machine

Introduction

The Komax 62 can be used for automatically notching or slitting ribbon cable with or without intermediate webbing. It is controlled from the Komax basic machine. Since the blade holder and the die-plate are quickly and easily interchanged, the same basic device can be used to slit or notch different types of wire.

Key features:

  • A basic machine for both processes
  • Fast conversion from one application to the other
  • Compact machine
  • Single or multiple notching/slitting possible
  • Full integration in the Komax basic machine

Technology

The processing principle is the same for both notching and slitting. The blades mounted on the blade holders cut the webbing of the ribbon cable by engaging in the die-plate.
Ribbon cables without intermediate webbing are cut through with thin notching blades. The cutting scraps automatically fall into the scraps container.
In order to be able to get a high productivity with simultan notching/slitting and cabel-cutting, the position of the Komax 62 can be conveniently changed by sliding it along the rail included in the delivery.

Technical data

Compressed air 4-6bar
Dimensions (l×w×h) 250*200*240mm
Weight 15kg
Notching/slitting length max. 200mm
Notching/slitting width max. 40mm
Ribbon cable types all types and makes
Wire grid dimensions all common dimensions

Options

  • Production tables
  • Straightening station
  • Blade holders (as specified by customer)
  • Die-plates (as specified by customer)
 

For more information please contact:

Komax AG, Dierikon
Tel. +41 (0)41 455 04 55
mailto: Komax AG Dierikon