Send page
Print this page
Disclaimer
ImprintKomax 26 – Hot stamp marker
Introduction
The Komax 26 marker utilizes the proven and reliable operating method of hot stamping. This marker is designed for use on Komax base machines, but has a simple input signal for signal activation that also allows it to be connected to all common types of automatic wire processing machines.
Key features:
- Very good value for the money
- Minimal conversion times
- Stamping wheels, foils and connection cables are compatible with those of the Komax 24
- Adjustable foil advance
- Key conversion procedures require no tools
- Optional production table for convenient and precise repositioning of marker
- New, economical marking wheels available at a reasonable price
User friendly
No tools are required for key conversion procedures like changing the wire, the foil or the text. Stamping foils are in cartridges for easy exchange outside the Komax 26. Only two wire guides are required to mark wires with outside diameters ranging from 1.3 to 10mm. The specially developed twist guard reduces wear on the stamping wheels. It is possible to displace the position of the marker with the whole optional marker table or by the special rod on the table.
Technical data
| Power supply | 230V, 50/60 Hz (115V, 50/60Hz) |
|---|---|
| Compressed air | 5-8 bar; consumption approx. 0,5 l/cycle |
| Stamping temperature | 50-200°C, continuously adjustable |
| Dimensions (WxHxD) | 350x320x500mm |
| Weight | 18kg |
| Wire outside diameters | 1.3 bis 10mm |
| Max. number of symbol wheels | 2x16 |
Accessories
- 2 Foilcoilers
- 32 spacer rings
- 2 stamping foils
- Wire guide for diameters ranging from 1.3 to 6mm
Options
- Production table Komax 250 with feet
- Production table Komax 250 with roles
- Transition head Komax 26 on a Komax 24 rack
- Various marking wheels
- Spacer ring to Komax 26
- Various wire guides
- Straightening station
- Various marking foils
- Various connection cables
- Accessory cassettes