Send page
Print this page
Disclaimer
ImprintKappa 350 – The next generation
Introduction
Power, performance and new type of sensors are the three key features of the
Kappa 350.
Kappa 350.
Simple operation allows these automatic cutting and stripping machines to be used efficiently and, coupled with their ultra-flexibility, enables them to handle even the most difficult tasks.
Kappa 350
This powerhouse with its double-blade principle is designed for processing round conductors with a cross section of up to 120m2 and a maximum outside diameter of up to 35mm. The powerful belt drive ensures gentle processing across the entire cross section range. The sensors are combined with a length measuring encoder to provide optimum process monitoring and accuracy. Zero-cuts are automatically minimized.
Area of application
The Kappa 350 belong to the latest generation of automatic cutting and stripping machines. This model is compelling in the extremely broad range of processing they cover. With the simple, flexible touch controls, even difficult to process materials can be set up quickly and easily.
The conversion to new types of cables can be done without tools so it is ultra-fast.
Sensors
The conductor diameter is automatically detected by a sensor using an inductive measuring approach. This feature greatly shortens setup and changeover and reduces operating errors. Laser and a CCD line optically measure the outside cable diameter and check that the cable is present during processing.
Flexible and user friendly
The intuitive TopTouch Kappa user software is modeled on the TopWin structure found in automatic crimping machines. With the integrated user wizards, Kappas are extremely easy to operate. In addition, they can be controlled and networked using TopWin, WPCS and TopConvert.
Periphery and interfaces
The integration of wire feeding systems, printers, active deposition units, etc. is standardized and easy. Special attention was paid to the integration and control of inkjet systems. Data backup and updates are handled over a USB port.
Technical data
| Cable cross section, stranded wires* | 2.5–120mm2 AWG14–AWG5/0 |
|---|---|
| Maximum outside diameter | 35mm (1.38in.) |
| Cable length range | 1mm–700000mm (0.039in.–765.53yd.) |
| Maximum wire transport speed | 3.3m/s (130in./s) |
| Quantity range (pcs) | 1–99999 |
| Maximum stripping lengths | Full strip Side 1: 290mm (11.42in.) Side 2: 150mm (5.9in.) |
| Intermediate stripping | Quantity × max. length Programmable (no restrictions on quantity and length) |
| Cable monitoring (Cable detector) | Standard |
| Automatic cross-section detection (Conductor detector) |
Standard (automatic detection of cut depth) |
| Noise level | <70dBA |
| Drive system | Belt drive |
| Production table | Standard |
| Electrical connection | 110/230VAC ±10% 50/60Hz 1200VA |
| Pneumatic connection | 5–8bar (73–116psi) |
| Dimensions (W×H×D) | 1090×1425×890mm (42.9×56.1×35in.) |
| Weight | Approx. 270kg (723.4lb) |
*The Kappa generations can process many conductors outside the indicated cross section range. Certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross section range. In case of doubt, we are happy to produce samples of your wires.
Accessories
The Komax Kappa line can be customized with various accessories to meet specific customer needs.
Feed systems
- Komax 104 passive dereeler
- Wire feed systems
- ads 115, ads 117, ads 119 and ads 123
Preliminary processing of wires
- Komax 26 hot stamp marker
- Komax 62 notching and slitting machine
- CSU intermediate stripping module
- ims 291 inkjet (HP/SC)
Deposit systems
- dps 272 dual drum coiler
- KRI 800 wire coiler
- dps 375 wire deposit system
- KA 3000 wire deposit system
- KA 6000 wire deposit system
Services
Komax naturally provides optimum support after your purchase as well.
- Commissioning
- Production assistance
- Training for different levels of users
- Worldwide customer service network with seamless supply of spare parts
- Introduction
- Kappa 350
- Area of application
- Sensors
- Flexible and user friendly
- Periphery and interfaces
- Technical data
- Accessories
- Services