Kappa 225

Introduction

The Komax Kappa 225 is an extremely versatile machine for cutting and stripping single and multi-pole conductors. With its high cutting and pull-off power, it can process stranded wires with a cross section of up to 10mm² and multi-pole cables with an outside diameter of up to 10.5mm. The user interface with its straightforward software is a well-proven performer in the field and allows all relevant data to be programmed and saved with ease. As a result, wires need only be programmed once.

Picture:
1

Zoom

Key features:

Wide range of use
Maximal flexibility
Shortest conversion times
Operating facility
Excellent price/performance ratio

User friendly

Quick-change guide parts
Automatic measurement of wire diameter
Automatically opening and closing rollers
Universal interfaces for upstream and downstream stations
Sequential programming
Passive deposit and scrap tray as standard features
All Kappa 210 and 220 blades, guide parts, drive rollers and accessories useable on Komax 225
Blow-out device for blade cleaning as standard feature

Technical data

Wire cross-sections	Stranded wires: 0.05 - 10mm² / AWG 30 - AWG 7 Solid wires: max. 2.5mm² / AWG 13 Many conductors with cross-sections exceeding 10mm² can be stripped on the Kappa 225. With extremely hard, tough wires, processing may not be able to be carried out within the cross section. If you are in doubt, we would be happy to process samples of your wires.
Outside diameter	max. 10.5mm
Flat ribbon cables	up to 12mm in width
Length range	1mm-99.9m (+/-0.2% or 1mm, depending on wire length)
Stripping lengths	Side 1 up to 40mm full and semi pull-off up to 999.9mm with multiple cuts Side 2 up to 36mm full pull-off up to 999.9mm semi pull-off or multiple cuts
Pull-off lengths	40mm both ends
Piece output example	5100 pieces/h for 100mm and two ended semi-pull-off of 5mm, wire 0.5mm²
Power	110 / 230V – 50/60Hz automatic switch-over
Weight	36kg
Dimensions (WxHxD)	560 x 340 x 390mm

Wire cross-sections

Stranded wires: 0.05 - 10mm² / AWG 30 - AWG 7

Solid wires: max. 2.5mm² / AWG 13

Many conductors with cross-sections exceeding 10mm² can be stripped on the Kappa 225. With extremely hard, tough wires, processing may not be able to be carried out within the cross section. If you are in doubt, we would be happy to process samples of your wires.

Outside diameter

max. 10.5mm

Flat ribbon cables

up to 12mm in width

Length range

1mm-99.9m (+/-0.2% or 1mm, depending on wire length)

Stripping lengths

Side 1 up to 40mm full and semi pull-off up to 999.9mm with multiple cuts

Side 2 up to 36mm full pull-off up to 999.9mm semi pull-off or multiple cuts

Pull-off lengths

40mm both ends

Piece output example

5100 pieces/h for 100mm and two ended semi-pull-off of 5mm, wire 0.5mm²

Power

110 / 230V – 50/60Hz automatic switch-over

Weight

36kg

Dimensions (WxHxD)

560 x 340 x 390mm

Accessories

The wide range of accessories available for the existing Kappa family can naturally also be used on the Kappa 225. With these diverse feeding, marking and deposit systems and the other accessories, users can put together an optimum processing line.

Options

Encoder length measurement system
Internal straightener
Parallel processing sets
Flat cable processing sets
PC software
Inkjet printing

For more information please contact:

Komax AG, Dierikon
Tel. +41 (0)41 455 04 55
mailto: Komax AG Dierikon