Komax 332

Introduction

The pull-off force measuring device Komax 332 is suited for operation on fully automatic crimping machine as well as for standalone operation on a central measuring place.

Picture:
1

Zoom

Key features:

Simpliest operation
Guarantee of a flawless production run
Elimination of input errors
Application on a central measuring place or directly on the base machine
Time saving due to direct transmission of the measured values to the base machine
Complete record of all measured values

Next >>

Function

On the fully automatic crimping machine

The Komax 332 measures pull-off forces up to 1000N. The regular pull-off movement is executed by hand. To ensure precision across the entire range, the measuring range is divided into three levels. TopWin automatically will determine the appropriate level.

With the pull-off force measuring device directly integrated in the production sequence, the machine operator is guided step by step through the operating sequence and has to conduct the mandatory quality measurements.

The measured value is transmitted directly to the base machine and compared with the predifined target value. Therefore, input errors are completely eliminated. All measured pull-off forces are stored and thus recorded via the WPCS interface.

At the central measuring place

Thanks to the large and good readable display, the manually operated pull-of force measuring device Komax 332 is very well suited for an operation on a central measuring place. Force measurements up to 1000N can be executed.

During standalone operation the measurement device can be switched between N, Kp, lbf.

<< Previous | Next >>