THE WAY TO MAKE IT

Linear Module LMS

Introduction

Shape, design

  • high stability and load capacity (2/4/6 kg) through double guided carriages with needle roller bearings
  • up to 250% higher workload than modules with recirculating ball bearings
  • high accuracy of positioning thanks to small deflection of the carriage
  • Repeat accuracy of +/- 0.01 mm
  • Cycles up to 30 strokes per minute
  • Standard with hydraulic dampers
  • space-saving, compact design and combinations in the same size
  • complete reproducable, positive interlocking design

Stroke setting, monitoring

  • stroke adjustments possible under pressure
  • no readjustment of the sensors required
  • high availability through simple installation and removal of commercial sensors and Reed-switch

Possible combinations

  • carefully thought out system and standard modular system requires minimal construction and assembly work
  • combination of modules with the same size
  • compatible with the F-Series
  • Picture:
  • 1
 

LM 4 S – Technical Data

Technical data, Lift-independent

Cylinder diameter   1x ø16mm
Theoretical force (at 5 bar) Fa
Fb		 100N
86N
max. speed   0.5m/s
Pneumatic connections   M5
Medium   Compressed air, filtered, oiled or non-oiled
Operating pressure range   3 - 7 bar
Temperature range   0 - +60°C
Repeating accuracy   +/-0.01mm
Maximum permissible weight m 2kg

Technical data, Lift-dependent

Rated lift h 30mm 60mm 90mm
Air consumption per cycle
(at 5 bar and Rated lift)		   0.03 l 0.07 l 0.01 l
Application point of all forces M 67mm 72mm 87mm
Weight   0.6kg 0.8kg 0.9kg
Maximum moment of force Ma
Mb
Mc		 15.0Nm
15.0Nm
23.0Nm		 25.0Nm
25.0Nm
30.0Nm		 25.0Nm
25.0Nm
30.0Nm

LM 5 S – Technical Data

Technical data, Lift-independent

Cylinder diameter   1x ø20mm
Theoretical force (at 5 bar) Fa
Fb		 157N
131N
max. speed   0.5m/s
Pneumatic connections   M5
Medium   Compressed air, filtered, oiled or non-oiled
Operating pressure range   3 - 7 bar
Temperature range   0 - +60°C
Repeating accuracy   +/-0.01mm
Maximum permissible weight m 4kg

Technical data, Lift-dependent

Rated lift h 60mm 90mm 120mm
Air consumption per cycle
(at 5 bar and Rated lift)		   0.15 l 0.23 l 0.30 l
Application point of all forces M 75mm 91.8mm 106.5mm
Weight   1.2kg 1.4kg 1.6kg
Maximum moment of force Ma
Mb
Mc		 80Nm
80Nm
70Nm		 100Nm
100Nm
80Nm		 100Nm
100Nm
80Nm

LM 6 S – Technical Data

Technical data, Lift-independent

Cylinder diameter   1x ø25mm
Theoretical force (at 5 bar) Fa
Fb		 245N
206N
max. speed   0.5m/s
Pneumatic connections   G1/8''
Medium   Compressed air, filtered, oiled or non-oiled
Operating pressure range   3 - 7 bar
Temperature range   0 - +60°C
Repeating accuracy   +/-0.01mm
Maximum permissible weight m 6kg

Technical data, Lift-dependent

Rated lift h 60mm 120mm 180mm
Air consumption per cycle
(at 5 bar and Rated lift)		   0.27 l 0.53 l 0.80 l
Application point of all forces M 100.4mm 129.4mm 165mm
Weight   2.1kg 2.6kg 3.2kg
Maximum moment of force Ma
Mb
Mc		 80Nm
80Nm
70Nm		 100Nm
100Nm
80Nm		 100Nm
100Nm
80Nm
 

For more information please contact:

Komax AG Rotkreuz, Switzerland
Thomas Henseler
phone.: +41 41 799 45 45
mailto: Thomas Henseler
 

Downloads