MicroLab 10
40 years cutting edge

MicroLab 10

Quality Tools

  • MicroLab 10

    MicroLab 10 – Furnishing materials and tool integrated into kit

  • MicroLab 10

    Manual cutting and polishing in a compact design

Quality assurance compact and mobile

Quick and efficient, regardless of location

  • Compact and complete mobile micrograph laboratory in a carry-case
  • Simple, intuitive usage
  • Short processing time and rapid creation of images
  • Precise evaluation of images using SmartVision software

Equipped for all processing steps

  • Cutting up to contact diameter D=2.5 mm
  • Polishing at 20’000 rpm.
  • Etching up to contact diameter D=2.5 mm
  • Visualization and evaluation

 

The MicroLab 10 enables micrographs to be taken quickly and easily regardless of the location. It covers all relevant processing steps – from cutting and polishing to etching and visualization. The compact carry-case design enables the quality of crimp and splice connections to be assessed with minimum effort and maximum effectiveness.

Compact, smart and reliable

Available in a portable carry-case, the compact MicroLab 10 is designed for contacts and conductors of up to 2.5 mm in diameter.

The samples can be quickly clamped in the holder – no re-clamping for all processing steps. The laboratory’s components include autonomous, independent preparation, evaluation and documentation modules. A complete on-site analysis can therefore be performed within a short period of time. A USB digital camera with a microscope is integrated into the lab for visualization purposes and to ensure complete documentation. The user-friendly, intuitive SmartVision software allows the user to analyze the images quickly and precisely.

The mobile MicroLab 10 requires virtually no maintenance.

Quick, mobile quality assurance

Conclusive micrographs can be taken at any time on a random basis, thereby enabling quality defects to be detected and preventing expensive breakdowns. The mobile design of the MicroLab 10 means that production approval decisions can be made on-site without delay. The measurements can be analyzed with the integrated software SmartVision.

SmartVision

The optimal software for micrograph analysis, which includes photography, measurement, evaluation and documentation, is integrated as standard.

 

Processing range (max. terminal Ø)
0.3 – 2.50 mm (corresponds to approx. 0.08 – 5.0 mm²)
Voltage supply 230 VAC, 50 Hz, 300 Watt
Dimensions (W × H × D) 500 × 360 × 450 mm
Weight approx. 20 kg