Crimping Press bt 722
40 years cutting edge

bt 722

Crimper

  • bt 722 benchtop press

    bt 722 Bench top crimping press

  • bt 722 benchtop press

    bt 722 Bench top press - Crimping tool

bt 722 – Bench top crimping press

  • Ultra-quick changeover, setup and cycle times
  • Active quality monitoring even during setup
  • Minimal material used during setup
  • Integrated crimp force analysis
  • Easy to operate with TopTouch
  • Saving of machine and processing parameters
  • Good/bad sorting through cutoff of bad crimps
  • Neat disposal of insulation scrap

This bench top crimping press is outstanding in terms of short cycle times, short changeover and setup times, programmable crimp height and the user-friendly TopTouch interface. These features, combined with the optional programmable stripper and bad part cutter, ensure top quality finished conductors regardless of the machine operator.

Function

Quality monitored crimping of single and multi-core cables is no problem with the semi-automatic bt 722 crimp press, not even when ultra-short stripping lengths are involved. Standard commercial crimping tools (left and back contact feed) can be used for processing.

Optimum controls

The controls are on a color touch screen and available in several different languages. System operation is fast, logical and symbol-based with the TopTouch user interface.

Quality

The programmable crimp height, integrated CFA / CFA+ crimp force analysis and bad part cutter ensure a final product of top quality. Quality measurements are mandatorily required during production setup. Once the measured values are entered, any deviations are automatically corrected; production is released when the measured values match the specified ones. This approach eliminates errors that can arise, for example, when the operator manually sets the crimp height.

Only one crimp is needed for referencing the integrated crimp force analysis.

This feature reduces the material used and minimizes the setup time.

Accessories/options

  • Programmable stripper
  • Bad part cutter
  • Contact strip chopper (chopper)
  • Active paper winder
  • Air feed set
  • Short shield length
  • Table
  • Sequence processing
  • Pressure regulation set
  • Crimp module analyzer

Optional stripper

With the programmable stripper, the device can be set up without mechanical adjustment. All required processing parameters can be set in and saved in the TopTouch user software. The zero-cut and way-back functions combine with a programmable cutting depth function to assure perfect stripping.

Optional bad part cutter

The bad part cutter cuts off any crimp detected as bad by the crimp force analyzer. You can program whether the cut is to go directly through the terminal or through the conductor. Cutting through the terminal involves less loss of cable length, allowing further use of the conductor.

Optional sequence processing

If you use sequence processing to process a multi-core cable that has, for example, different conductor cross sections but the same terminal, you only need to handle the cable once

The conductors can be manufactured with different crimp heights and different types of crimp force analysis. The machine operator is visually guided through shielded cable production.

Services

Komax offer to you an optimal support by individual Service offers.

  • After-Sales Service
  • Production Assistance
  • Certified Training Courses
  • Feasibility Test
Crimp force 20kN (4500lbf)
Conductor cross section for crimping 0.05*–6mm² (AWG30–AWG10)
Programmable crimp height +0.2/-0.8mm (+0.008/-0.032in.)
Programmable stroke  10–40mm (0.39–0.58in.) Optional 12mm (0.47in.) 
Electrical connection  1×115V / 50/60Hz
1×230V / 50/60Hz 
Dimensions (W×H×D)  700×750×500mm (25.5×29.5×16.7in.)
Weight approx. 110kg (243lb)

* Small cross sections require optimal conditions to monitor the crimp force. If you are in doubt about your wires, we are happy to process samples of them.

Optional stripper:

Stripping length max. 12mm (0.47in.)
Conductor cross section for stripping 0.05–4mm² (AWG30–AWG12)
Bad terminal cut and zero-cut 0.05–2.5mm² (AWG30–AWG14)
Cycle time  Approx. 0.9sec; including way-back, zero-cut 
Pneumatic connection  5–6bar (72.25–116psi)

Optional bad part cutter:

Bad part cut through terminal Up to 2.5mm² (AWG13)
Bad part cut through cable Up to 4mm2 (AWG11)

Cutting pulled strands Cut pulled strands
Precision cut Precision cut
Full stripping Full strip one side
Half stripping Half strip one side
Multi-conductor cable processing Multi conductor cable bt
Crimping Crimping bt
Sequence processing Sequence bt
Double crimping Double crimping bt
Split cycle for closed barrels Split cycle one side