Gamma 333 PC
40 years cutting edge

Gamma 333 PC

Crimp to Crimp

  • Gamma 333 PC Wire crimping machine

    Gamma 333 PC Crimping machine

  • Gamma 333 PC Wire crimping machine

    Gamma 333 PC Crimping machine

  • Gamma 333 PC Wire crimping machine

    Gamma 333 PC Crimping machine

Gamma 333 PC – fully automatic crimping machine

  • High daily productivity thanks to fast changeovers
  • Flexibility and diverse applications
  • Maximum availability with minimal maintenance
  • Gentle transport of halogen-free conductors
  • Integrated quality measuring devices
  • User friendly, intuitive machine operation


This fully automatic crimping machine stands out from the rest for the high daily productivity it achieves through short changeover times and high availability. This thoroughly tried-and-tested machine is also available with a belt drive. That means optimum force transmission and increased output for long and difficult to process conductors. A supplementary unit that is ideal for a broad processing range.


The Komax Gamma 333 PC and PC-B are flexible fully automatic crimping machines offering a variety of efficient processing capabilities. Depending on requirements, these machines can apply two-ended crimp contacts and end sleeves for strands, as well as double crimp connections with three different contacts or seals and sleeves to one end of the cable. Tinning and ink-jet marking are two further options. These models can integrate customer-specific applications like MIL crimping, welding or compaction for a further diversification of production.

With the three different types of transport rollers, gentle wire feeding can be granted. A highly dynamic AC servomotor acts as the drive. The encoder measuring system with integrated anti-slip control system (ACS) ensures a high degree of repetition accuracy regardless of the container used.

Gamma 333 PC Doppelgreifermodul


The entire cross-section range is processed with dynamic programmable drives and V stripping blades. The highest quality requirements and process reliability are ensured with crimp force analysis CFA, the measuring devices for crimp height (K341) and pull-out force (K331/ K332) and the barcode scanner (K351). These quality monitoring functions can be integrated in the production process to guarantee that all conductors produced comply with the specified values.

User friendly

The layout is well-conceived to allow ultra-short changeover from crimping to twisting, fluxing and tinning. Fitted with safety covers that open vertically, the Komax Gamma 333 PC und PC-B are readily accessible from all sides. Machine operation is so easy and convenient, as are all aspects of material handling. The reliable TopWin user interface adds to this high level of operator convenience, in over 20 languages. The machine has an optional WPCS interface that makes it easy for a customer to interface with one of ist networks.

Gamma 333 PC Stationen


The optional interface WPCS (Wire Processing Communication Standard) allows Komax machines to be networked under TopWin. With this open interface, the machine is easy to integrate into existing production sequences.

TopNet is a clearly arranged management software with functions for the centralized creation and management of parts, articles and jobs that help you to optimize your production operations.

TopConvert can be used to convert already existing job and article lists to WPCS format. This data can then be directly processed by fully automatic crimping machines.

Processing modules

The Gamma 333 PC can be customized with various accessories to meet specific customer needs: 

  • mci 711/721 crimping module
  • mci 761 seal module
  • mci 792 sleeve module
  • mci 782 twisting module
  • ioc 785 fluxing/tinning device
  • MIL crimp module
  • AEH module for end sleeve for strand
  • Ultrasonic compaction
  • Double gripper module
  • Welding modules


Through the addition of various accessories, the Komax Gamma 333 PC can be customized to meet your exact needs yet remains adaptable to accommodate future requirements.

Accessories for crimp module

  • Height adjustable module elevating table
  • Contact feed units with paper strip take-up
  • Contact strip cutter

Wire deposition

  • Basic module, 1.5m
  • Extension module, 2m or 4m

Process monitoring

  • Crimp force monitoring
  • Seal monitoring
  • Splice monitoring
  • Detection system for wire end and knots


Komax offer to you an optimal support by individual Service offers.

  • After-Sales Service
  • Production Assistance
  • Certified Training Courses
  • Feasibility Test
Length range 60mm–65000mm(2.36in.–213ft.)
Optional from 30mm (1.18in.)
Length accuracy Repeat accuracy ±(0.2%+1.0mm (0.04in.)
Stripping lengths Side 1: 0.1–15mm (0.004–0.59in) Optionally from 28mm (1.10in)
Side 2: 0.1–15mm (0.004–0.59in)
Wire cross section* 0.13mm²–5mm² (AWG26–AWG10)
Wire draw-in speed 6m/s 40m/s² (19.7ft/s 131.2ft/s²)
Noise level <75dB (without crimp modules)
Electrical connection 3x208 - 480V 50/60Hz
Pneumatic connection 5–6bar (73–87psi) 
Air consumption 6.5m³/h (230ft³/h) 
Weight approx. 1200kg (2649lb.) gross
*Certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross section range. In case of doubt, we are happy to produce samples of your wires.

Gamma 333 PC Layout
Cutting Cutting
Cutting pulled strands Cut pulled strands
Full stripping Full strip both sides
Half stripping Half strip both sides
Core processing Inner conductor 2pol crimp
Double sheath cable processing Triaxial cable
Coaxial and triaxial cable processing Coaxial cable
Intermediate strip Intermediate strip
Crimping Crimping cc
Hot stamp marking Hot stamp marking with strip
Inkjet marking Inkjet
Sequence processing Sequence cc
Double crimping Double crimping same crimp
Split cycle for closed barrels Split cycle both sides
Seal insertion Sealing one side
Twisting / tinning Twisting and tinning
Sleeve insertion Sleave insertion G333
Ferrule crimping Ferrule crimping
MIL crimping MIL Crimp
Wire end solidifying, splicing, welding Wire end solidifying